Our powerful LED extends the standard LED growing spectrum providing energy outside the PAR range to include ultraviolet (UV) and far-red, promoting stronger plant growth with heavier flowers. The LED 350-ES is for growers with limited space who need lower wattage. This three-bar system will cover a 3×4 space with the same spectrum and benefits as the LED 700-ES.
BENEFITS OF UV
Increases resin production
Improves taste and smell
Causes more branching and less stretching
Increases root mass
BENEFITS OF FAR-RED
Increases plant biomass
Triggers flowering
Enhances flower size
Improves efficiency of overall spectrum
BEYOND PAR SPECTRUM
Full spectrum including energy in UV and Far Red to enhance plant development and spectrum efficiency
UNIFORM DISTRIBUTION
Utilizes wide distribution LEDs to disperse colors uniformly over the coverage area
LONG LIFE
Robust thermal and electrical design allows LEDs to run cooler and retain 90% of output beyond 36,000 hrs
RUGGED DESIGN
Rigid frame provides consistent positioning of LED boards for maximum uniformity
DIMMING CAPABILITY
Ability to ease plant transition from veg to flower stages
CONFORMAL COATING
Protects LEDs against dust and water, no optical loss, easy to clean
The nine-position dial will allow you to set the level you want for the stage of growing you are in.
| Dim Position | Power Level | Input Watts |
| 0 | 0% | 0 |
| 1 | 16% | 56W |
| 2 | 30% | 105W |
| 3 | 42% | 147W |
| 4 | 53% | 186W |
| 5 | 65% | 228W |
| 6 | 75% | 263W |
| 7 | 85% | 289W |
| 8 | 95% | 333W |
| 9 | 100% | 350W |
| Coverage Area | 3 ft. x 4 ft. |
| Height Above Canopy | 18 in. |
| Distance between fixtures* | 8 in. |
*The distance between fixtures should be measured from the edge of the system
Technical Specs apply to all voltages. Actual performance may vary.
277V (1.3A) is made to order.
MSRP
$699.95
Wattage1
350 Watts
Weight
25 lbs
Dimensions
44.8 in. x 24 in. x 3.9 in.
LED Bars
3 bars
Suggested Height Above Canopy2
18 in.
Coverage Area
3 ft. x 4 ft.
Distance Between Fixtures3
8 in.
Cooling Needed
1,194 BTUs
Dimming
Yes (manual)
Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)
Power Factor
>0.95
Thermal Management
Passive
Compliance
Designed to meet UL
Warranty
5 year limited
Environmental Protection Rating
Designed to meet IP65
Country of Origin
Assembled in USA
Initial Lumens
39,500
Kelvin
3100K
CRI
92
1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.
Output Specs apply to all voltages. Actual performance may vary.
PBFD Average (10×10 Room)
423 μmol/m2-sec
PBF Efficacy
2.3 μmol/Joule
PPFD Average (10×10 Room)
355 μmol/m2-sec
PPF Efficacy
1.9 μmol/Joule
Uniformity – avg/min
2.2/1
Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.
LED 350-ES
Power Cord
Installation Instructions
Technical Specs apply to all voltages. Actual performance may vary.
277V (1.3A) is made to order.
MSRP
$699.95
Wattage1
350 Watts
Weight
25 lbs
Dimensions
44.8 in. x 24 in. x 3.9 in.
LED Bars
3 bars
Suggested Height Above Canopy2
18 in.
Coverage Area
3 ft. x 4 ft.
Distance Between Fixtures3
8 in.
Cooling Needed
1,194 BTUs
Dimming
Yes (manual)
Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)
Power Factor
>0.95
Thermal Management
Passive
Compliance
Designed to meet UL
Warranty
5 year limited
Environmental Protection Rating
Designed to meet IP65
Country of Origin
Assembled in USA
Initial Lumens
39,500
Kelvin
3100K
CRI
92
1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.
Output Specs apply to all voltages. Actual performance may vary.
PBFD Average (10×10 Room)
423 μmol/m2-sec
PBF Efficacy
2.3 μmol/Joule
PPFD Average (10×10 Room)
355 μmol/m2-sec
PPF Efficacy
1.9 μmol/Joule
Uniformity – avg/min
2.2/1
Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.
LED 350-ES
Power Cord
Installation Instructions
Product specifications subject to change or product may be discontinued without notice. Data shown is typical and based on laboratory conditions. Actual performance in specific applications may vary.
English
Spanish
French