GROW BEYOND PAR

Includes UV and Far-Red

Rise to the top with the new Ascend LED Grow Light Systems

Our powerful LED extends the standard LED growing spectrum providing energy outside the PAR range to include ultraviolet (UV) and far-red, promoting stronger plant growth with heavier flowers.

The LED 450-EVS was designed to lower the wattage and cost for lighting your veg space.

BENEFITS OF UV
Increases resin production
Improves taste and smell
Causes more branching and less stretching
Increases root mass

BENEFITS OF FAR-RED
Increases plant biomass
Triggers flowering
Enhances flower size
Improves efficiency of overall spectrum

A TRUE FULL SPECTRUM LED GROW LIGHT SYSTEM

12% of Spectral Energy in UV + Far-Red

LED 700-ES spectrum


BEYOND PAR SPECTRUM
Full spectrum including energy in UV and Far Red to enhance plant development and spectrum efficiency


UNIFORM DISTRIBUTION
Utilizes wide distribution LEDs to disperse colors uniformly over the coverage area


LONG LIFE
Robust thermal and electrical design allows LEDs to run cooler and retain 90% of output beyond 36,000 hrs


RUGGED DESIGN
Rigid frame provides consistent positioning of LED boards for maximum uniformity


DIMMING CAPABILITY
Ability to ease plant transition from veg to flower stages


CONFORMAL COATING
Protects LEDs against dust and water, no optical loss, easy to clean

Take Control!

Compatible with External Controllers

The LED 450-EVS is equipped to work with most 0-10V LED controllers using RJ cables. Pair the LED 450-EVS with the EYE HORTILUX GRC-LED controller (sold separately). The GRC-LED is easy to use and can control up to 100 fixtures.

Learn about the GRC-LED Controller here.

Manually Dim with the On-Board Knob

The ten-position dial will allow you to set the level you want for the stage of growing you are in.
Dim Position Power Level Input Watts
0 0% 0
1 16% 71
2 30% 133
3 42% 189
4 53% 239
5 65% 292
6 75% 338
7 85% 383
8 95% 426
9 100% 450

Recommended Fixture Setup & Spacing

OPTIMAL SETUP RECOMMENDATION

Coverage Area  4 ft. x 4 ft.
Height Above Canopy 18 in.
Distance between fixtures*  12 in..

*The distance between fixtures should be measured from the edge of the system

Technical Specs apply to all voltages. Actual performance may vary.

120V

Product Number
100577
UPC
639125005777
Amperage
3.8A @ 120V
Power Cord (Included)
12 ft. (3.6m) 120V

240V

Product Number
100580
UPC
639125005807
Amperage
1.9A @ 240V
Power Cord (Included)
12 ft. (3.6m) 240V

277V

Product Number
100583
UPC
639125005838
Amperage
1.6A @ 277V
Power Cord (Included)
12 ft. (3.6m) 277V

Pigtail available for 120V-277V. Contact us to special order.
347V (1.3A) and 480V (1A) are made to order.

MSRP
$899.95

Wattage1
450 Watts

Weight
30 lbs

Dimensions
44.8 in. x 44 in. x 3.9 in.

LED Bars
4 bars

Suggested Height Above Canopy2
18 in.

Coverage Area
4 ft. x 4 ft.

Distance Between Fixtures3
8 in.

Cooling Needed
1,535 BTUs

Dimming
Yes (with controller or manual)

Controllable
Yes (controller sold separately)

Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)

Power Factor
>0.95

Thermal Management
Passive

Compliance
Designed to meet UL

Warranty
5 year limited

Environmental Protection Rating
Designed to meet IP65

Country of Origin
Assembled in USA

Initial Lumens
57,000

Kelvin
3900K

CRI
92

1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.

Output Specs apply to all voltages. Actual performance may vary.

PBAR Range (280-800nm)

PBF
1060 μmol/sec

PBFD Average (10×10 Room)
525 μmol/m2-sec

PBF Efficacy
2.4 μmol/Joule

PAR* Range (400-700nm)

PPF
930 μmol/sec

PPFD Average (10×10 Room)
455 μmol/m2-sec

PPF Efficacy
2.1 μmol/Joule

Fixture Uniformity

Uniformity – max/min
3.0/1

Uniformity – avg/min
2.1/1

Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.

Ascend LED Grow Light Systems Sell Sheet
LED 450-EVS Installation Instructions

LED 450-EVS
Power Cord
Installation Instructions
(1) splitter and (2) RJ cables, 10 ft. (3 m)

Technical Specs

Technical Specs apply to all voltages. Actual performance may vary.

120V

Product Number
100577
UPC
639125005777
Amperage
3.8A @ 120V
Power Cord (Included)
12 ft. (3.6m) 120V

240V

Product Number
100580
UPC
639125005807
Amperage
1.9A @ 240V
Power Cord (Included)
12 ft. (3.6m) 240V

277V

Product Number
100583
UPC
639125005838
Amperage
1.6A @ 277V
Power Cord (Included)
12 ft. (3.6m) 277V

Pigtail available for 120V-277V. Contact us to special order.
347V (1.3A) and 480V (1A) are made to order.

MSRP
$899.95

Wattage1
450 Watts

Weight
30 lbs

Dimensions
44.8 in. x 44 in. x 3.9 in.

LED Bars
4 bars

Suggested Height Above Canopy2
18 in.

Coverage Area
4 ft. x 4 ft.

Distance Between Fixtures3
8 in.

Cooling Needed
1,535 BTUs

Dimming
Yes (with controller or manual)

Controllable
Yes (controller sold separately)

Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)

Power Factor
>0.95

Thermal Management
Passive

Compliance
Designed to meet UL

Warranty
5 year limited

Environmental Protection Rating
Designed to meet IP65

Country of Origin
Assembled in USA

Initial Lumens
57,000

Kelvin
3900K

CRI
92

1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.

Output Specs

Output Specs apply to all voltages. Actual performance may vary.

PBAR Range (280-800nm)

PBF
1060 μmol/sec

PBFD Average (10×10 Room)
525 μmol/m2-sec

PBF Efficacy
2.4 μmol/Joule

PAR* Range (400-700nm)

PPF
930 μmol/sec

PPFD Average (10×10 Room)
455 μmol/m2-sec

PPF Efficacy
2.1 μmol/Joule

Fixture Uniformity

Uniformity – max/min
3.0/1

Uniformity – avg/min
2.1/1

Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.

Resources
Ascend LED Grow Light Systems Sell Sheet
LED 450-EVS Installation Instructions
In The Box

LED 450-EVS
Power Cord
Installation Instructions
(1) splitter and (2) RJ cables, 10 ft. (3 m)

Product specifications subject to change or product may be discontinued without notice. Data shown is typical and based on laboratory conditions. Actual performance in specific applications may vary.