Our powerful LED extends the standard LED growing spectrum providing energy outside the PAR range to include ultraviolet (UV) and far-red, promoting stronger plant growth with heavier flowers. This linear LED system is intended for commercial applications with high ceilings such as large indoor grow rooms or greenhouses.
BENEFITS OF UV
Increases resin production
Improves taste and smell
Causes more branching and less stretching
Increases root mass
BENEFITS OF FAR-RED
Increases plant biomass
Triggers flowering
Enhances flower size
Improves efficiency of overall spectrum
BEYOND PAR SPECTRUM
Full spectrum including energy in UV and Far Red to enhance plant development and spectrum efficiency
UNIFORM DISTRIBUTION
Utilizes wide distribution LEDs and reflectors to disperse colors uniformly over the coverage area
LONG LIFE
Robust thermal and electrical design allows LEDs to run cooler and retain 90% of output beyond 36,000 hrs
RUGGED DESIGN
Rigid frame provides consistent positioning of LED boards for maximum uniformity
CONTROL CAPABILITY
Uses external controls for full dimming ability, easing plant transition between growth stages
CONFORMAL COATING
Protects LEDs against dust and water, no optical loss, easy to clean
Use the reflectors and hang the fixture 3ft above the canopy for optimal plant growth. Reflectors should be used up to 4ft above the canopy for best output and uniformity. Remove reflectors if hanging 4ft or higher. Reflectors are not recommended for greenhouse use.
The driver can be hung in a line between each fixture. It can also be hung above each fixture, but make sure there is a 1ft space between for heat dispersion.
There are many variables that can affect how much light a plant actually receives from the light source. Unfortunately, those variables change based on the stage of plant growth, how far apart the fixtures are placed, what reflective materials are in the grow room and so much more. That’s why we offer FREE lighting layouts for commercial growers.
Our process is simple. We ask you a handful of questions to uncover what your requirements are and craft a lighting proposal. From there, we can fine-tune based on your needs.
Learn about the GRC-LED Controller here.
Technical Specs apply to all voltages. Actual performance may vary.
MSRP
$1,099.95
Wattage1
700 Watts
Weight
Fixture: 13.25 lbs. / Reflectors: 4 lbs.
Driver: 13.75 lbs
Dimensions
Fixture: 44.15 x 9.25 x 5.5 (1121 x 235 x 140)
Driver: 16 x 5.1 x 6 (406 x 130 x 152)
LED Bars
1 Bar
Suggested Height Above Canopy2
3 ft.
Coverage Area
4 ft. x 4 ft.
Distance Between Fixtures3
Variable based on application
Cooling Needed
2,388 BTUs
Dimming
Yes (with controller)
Controllable
Yes (controller sold separately)
Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)
Power Factor
>0.95
Thermal Management
Passive
Compliance
Designed to meet UL 8800
ETL Listed (pigtail only)
Warranty
5 year limited
Environmental Protection Rating
IP65 Rated
Country of Origin
Assembled in USA
Initial Lumens
79,000
Kelvin
3100K
CRI
92
1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.
Output Specs apply to all voltages. Actual performance may vary.
PBFD Average (10×10 Room)
862 μmol/m2-sec
PBF Efficacy
2.4 μmol/Joule
PPFD Average (10×10 Room)
743 μmol/m2-sec
PPF Efficacy
1.97 μmol/Joule
Uniformity – avg/min
1.38/1
Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.
LED 700-ESib
(2) Reflectors
AC input power cord (outlet to driver), 12 ft. (3.6 m)
DC power cord (driver to fixture), 3 ft. (1 m)
Mounting hardware
(1) splitter and (2) RJ cables, 10 ft. (3 m)
Technical Specs apply to all voltages. Actual performance may vary.
MSRP
$1,099.95
Wattage1
700 Watts
Weight
Fixture: 13.25 lbs. / Reflectors: 4 lbs.
Driver: 13.75 lbs
Dimensions
Fixture: 44.15 x 9.25 x 5.5 (1121 x 235 x 140)
Driver: 16 x 5.1 x 6 (406 x 130 x 152)
LED Bars
1 Bar
Suggested Height Above Canopy2
3 ft.
Coverage Area
4 ft. x 4 ft.
Distance Between Fixtures3
Variable based on application
Cooling Needed
2,388 BTUs
Dimming
Yes (with controller)
Controllable
Yes (controller sold separately)
Cord Length
12 ft. (3.6m) (see Voltage Table for available ends)
Power Factor
>0.95
Thermal Management
Passive
Compliance
Designed to meet UL 8800
ETL Listed (pigtail only)
Warranty
5 year limited
Environmental Protection Rating
IP65 Rated
Country of Origin
Assembled in USA
Initial Lumens
79,000
Kelvin
3100K
CRI
92
1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.
Output Specs apply to all voltages. Actual performance may vary.
PBFD Average (10×10 Room)
862 μmol/m2-sec
PBF Efficacy
2.4 μmol/Joule
PPFD Average (10×10 Room)
743 μmol/m2-sec
PPF Efficacy
1.97 μmol/Joule
Uniformity – avg/min
1.38/1
Room measurements were taken with average reflective material at the optimal recommended setup.
*UV and Far Red are not counted in PPF or PPFD measurements.
LED 700-ESib
(2) Reflectors
AC input power cord (outlet to driver), 12 ft. (3.6 m)
DC power cord (driver to fixture), 3 ft. (1 m)
Mounting hardware
(1) splitter and (2) RJ cables, 10 ft. (3 m)
English
Spanish
French
