More light on target!

The SE 600 grow light system is designed to maximize the performance of 600 watt EYE HORTILUX grow lamps. This system focuses 20% more of the light to the target area than our nearest competitor to enhance the performance of the lamp and maximize plant quality and yield. The SE 600 reflector was designed around 600W lamps to create a consistent and uniform distribution of light.

Designed Specifically for 600 Watt Lamps

Most grow fixtures are sized for 1000 watt lamps leading to an inefficient focus of light. The SE 600 Grow Light System utilizes a reflector design sized specifically for 600 watt grow lamps. This compact reflector design optimizes performance focusing more light on the plant canopy with superior uniform light distribution.

Optimized to Operate Three EYE HORTILUX Lamps

Choose from three great spectrums for every stage of growth.

Easy Reflector Replacement

The EYE HORTILUX SE 600 Grow Light System includes a reflector that is easy to replace. After several grow cycles, system reflectors get dirty and sometimes scratched from cleaning. Having a reflector replacement schedule helps maintain consistent plant quality and high yields. Replacing a reflector in the SE 600 does not require purchasing an entirely new system.

Remote Ballast Capability

Growers concerned about extra heat can remove the SE 600 ballast from the fixture and operate it from a remote location. The ballast can then be run up to 15 feet away from the lamp.

OPTIMAL SETUP RECOMMENDATION*

Coverage Area	4 ft. x 4 ft.
Height Above Canopy	3 ft.
Distance between fixtures**	4 ft.

*Optimal setup and performance measurements based on SE 600 fixture with HORTILUX 600W Ceramic HPS lamp. Actual performance may vary. **The distance between fixtures should be measured from the center of the lamp.

Optimize your canopy coverage

Canopy coverage with recommended number of lights

uniformity-sideview-example-1000 — 4 Feet Apart

Canopy coverage with fewer lights

uniformity-sideview-example-02 1000 — 5 Feet Apart

Canopy coverage with more lights

uniformity-sideview-example-03 1000 — 3 Feet Apart

Recommended fixture spacing

SE 600 Grow Light System Specs and Other Resources Below

Technical Specs
Output Specs
Resources
In The Box

Technical Specs apply to all voltages. Actual performance may vary.

See Silver Ballast Specs here.

w/Ceramic HPS

Product Number

90013

UPC

639125900133

Lamp Country of Origin

Made in USA

w/Daylight BLUE MH

Product Number

90040

UPC

639125900409

Lamp Country of Origin

Made in USA

w/Super HPS

Product Number

90039

UPC

639125900393

Lamp Country of Origin

Made in USA

120V

Amperage

5.58A @ 120V

BTUs Needed to Cool
2,790 BTUs @ 120V

Power Cords (Included)
8 ft. (2.4m) 120V and 240V

240V

Amperage
2.64A @ 240V

BTUs Needed to Cool
2,670 BTUs @ 240V

Power Cords (Included)
8 ft. (2.4m) 120V and 240V

MSRP
$499.95

Runs Lamp Wattage¹
600W

Weight
17 lbs

Dimensions
23.6 in. x 12.7 in. x 7.1 in.
(600mm x 300mm x 180mm)

Can Be Air Cooled
Yes

Socket Type
Mogul E39

Suggested Height Above Canopy²
3 ft.

Coverage Area
4 ft. x 4 ft.

Distance Between Fixtures³
4 ft.

Dimming
No

Cord Length
8 ft. (2.4m)

Power Factor
>0.95

Operating Frequency
50/60 Hz

Open/Closed Fixture
Open

Compliance
UL1598

Warranty
3 year limited

Environmental Protection Rating
None

Country of Origin
Fixture: Assembled in USA.
Lamps: Made in USA.

¹Power consumption varies based on application.
²All output measurements taken from this height.
³The distance between fixtures should be measured from the center of the lamp.

PBF (280nm-800nm) PPF¹ (400nm-700nm)

Output Specs apply to all voltages. Actual performance may vary.

600W Ceramic HPS

Lamp PBF
1246 μmol/sec

Lamp PPF
655 μmol/sec

More CHPS specs Here.

In the SE 600

10×10 Room²
PPFD 137 μmol/m²-sec

Efficacy³
PBF 1.96 μmol/Joule
PPF 1.03 μmol/Joule

600W Daylight BLUE

Lamp PBF
1014 μmol/sec

Lamp PPF
675 μmol/sec

More BLUE specs Here.

In the SE 600

10×10 Room²
PPFD 137 μmol/m²-sec

Efficacy³
PBF 1.59 μmol/Joule
PPF 1.06 μmol/Joule

600W Super HPS

Lamp PBF
1140 μmol/sec

Lamp PPF
875 μmol/sec

More HPS specs Here.

In the SE 600

10×10 Room²
PPFD 400 μmol/m²-sec

Efficacy³
PBF 1.79 μmol/Joule
PPF 1.37 μmol/Joule

Fixture Uniformity

Uniformity – max/min
2.9/1

Uniformity – avg/min
2.0/1

¹UV and Far Red are not counted in PPF or PPFD measurements.
²Room measurements were taken with average reflective material at the optimal recommended setup.
³Efficacy calculated at 240V

SE600-Spec-Sheet-thumb — SE 600 Spec Sheet

SE600-installation-instructions-thumb — SE 600 Installation Instructions

1. EYE HORTILUX® 600 watt Ceramic HPS Grow Lamp
2. EYE HORTILUX® SE 600 fixture: reflector, frame, 120/240 volt electronic ballast (detachable)
3. 120 volt power cord
4. 240 volt power cord

Technical Specs: Technical Specs apply to all voltages. Actual performance may vary.

See Silver Ballast Specs here.

w/Ceramic HPS

Product Number

90013

UPC

639125900133

Lamp Country of Origin

Made in USA

w/Daylight BLUE MH

Product Number

90040

UPC

639125900409

Lamp Country of Origin

Made in USA

w/Super HPS

Product Number

90039

UPC

639125900393

Lamp Country of Origin

Made in USA

120V

Amperage

5.58A @ 120V

BTUs Needed to Cool
2,790 BTUs @ 120V

Power Cords (Included)
8 ft. (2.4m) 120V and 240V

240V

Amperage
2.64A @ 240V

BTUs Needed to Cool
2,670 BTUs @ 240V

Power Cords (Included)
8 ft. (2.4m) 120V and 240V

MSRP
$499.95

Runs Lamp Wattage¹
600W

Weight
17 lbs

Dimensions
23.6 in. x 12.7 in. x 7.1 in.
(600mm x 300mm x 180mm)

Can Be Air Cooled
Yes

Socket Type
Mogul E39

Suggested Height Above Canopy²
3 ft.

Coverage Area
4 ft. x 4 ft.

Distance Between Fixtures³
4 ft.

Dimming
No

Cord Length
8 ft. (2.4m)

Power Factor
>0.95

Operating Frequency
50/60 Hz

Open/Closed Fixture
Open

Compliance
UL1598

Warranty
3 year limited

Environmental Protection Rating
None

Country of Origin
Fixture: Assembled in USA.
Lamps: Made in USA.

¹Power consumption varies based on application.
²All output measurements taken from this height.
³The distance between fixtures should be measured from the center of the lamp.
Output Specs: PBF (280nm-800nm) PPF¹ (400nm-700nm)

Output Specs apply to all voltages. Actual performance may vary.

600W Ceramic HPS
Lamp PBF
1246 μmol/sec

Lamp PPF
655 μmol/sec

More CHPS specs Here.
In the SE 600
10×10 Room²
PPFD 137 μmol/m²-sec

Efficacy³
PBF 1.96 μmol/Joule
PPF 1.03 μmol/Joule
600W Daylight BLUE
Lamp PBF
1014 μmol/sec

Lamp PPF
675 μmol/sec

More BLUE specs Here.
In the SE 600
10×10 Room²
PPFD 137 μmol/m²-sec

Efficacy³
PBF 1.59 μmol/Joule
PPF 1.06 μmol/Joule
600W Super HPS
Lamp PBF
1140 μmol/sec

Lamp PPF
875 μmol/sec

More HPS specs Here.
In the SE 600
10×10 Room²
PPFD 400 μmol/m²-sec

Efficacy³
PBF 1.79 μmol/Joule
PPF 1.37 μmol/Joule
Fixture Uniformity
Uniformity – max/min
2.9/1

Uniformity – avg/min
2.0/1

¹UV and Far Red are not counted in PPF or PPFD measurements.
²Room measurements were taken with average reflective material at the optimal recommended setup.
³Efficacy calculated at 240V
Resources: SE 600 Spec Sheet

SE 600 Installation Instructions
In The Box: 1. EYE HORTILUX® 600 watt Ceramic HPS Grow Lamp
2. EYE HORTILUX® SE 600 fixture: reflector, frame, 120/240 volt electronic ballast (detachable)
3. 120 volt power cord
4. 240 volt power cord

Product specifications subject to change or product may be discontinued without notice. Data shown is typical and based on laboratory conditions. Actual performance in specific applications may vary. CAUTION – Must only operate HID grow lamps that are rated for “Open” fixture operation, ANSI type “O.”