Ceramic HPS Spectrum Now in a DE!

Available in 1000W and 600W

When Red Equals White in a DE

The most unique grow lamp on the market, the Ceramic HPS, is now available in a double ended version. The heavy red spectrum produces a bright white light that plants thrive under. Ceramic HPS produces high quality yields and healthy vibrant plants ready for multiple harvests!

DE Ceramic HPS 1000W

DE Ceramic HPS 600W

Click here to see what ballasts the DE CHPS are compatible with.

Advantages

Ceramic HPS is not your standard HPS light. A typical HPS light produces an orange light with a narrow spectral distribution. The Ceramic HPS produces a white light and has a much broader spectrum with an abundance of red spectral energy. The spectral energy of Ceramic HPS is unmatched in the Horticulture market and is only possible through exclusive EYE HORTILUX chemistry.

Benefits

Ceramic HPS enhances essential oil production and produces plants with minimal stretching. Our competitors’ HPS lights produce tired, dull looking plants at the end of the flowering stage. Ceramic HPS produces vibrant colorful plants which stay strong and healthy throughout the flowering stage. Use the DE Ceramic HPS on its own in your flower room or in a checkerboard setup with our standard DE HPS grow lamp.

The DE Ceramic HPS

Made in the USA
Exclusive EYE HORTILUX Spectrum
Ceramic HID technology
Emits a clean, white light
Heavy red spectrum for superior flowering performance
Checkerboard with DE HPS or use on its own to produce a quality plant without a loss in yield
Compatible with e-Ballasts that operate at or above 100 kHz
Operated and tested before packaging
Glove included with lamp for safe handling
Full one-year warranty

Lamp specs and other info in the tabs below

1000W

Must start 1000W DE Ceramic HPS lamp at 1000 watt setting and operate for at least 100 hours if dimming.

MSRP	$129.95
Initial Lumens	67000
Color Temperature	2300K
CRI	85
Operating Position	Horizontal
Fixture Requirement	Open Rated
ANSI Code	NA
Ballast Requirement	Electronic – operating frequency at or above 100 kHz Click here to see ballast compatibility list
Warm-Up Time	30 Minutes
Hot Re-Strike Time	15 Minutes
Suggested height above canopy (varies with room space, ventilation and reflector size, form and shape.)	4 ft

600W

Must operate 600W DE lamp at 600 watt setting only. Running the lamp at any other wattage will void warranty.

MSRP	$114.95
Initial Lumens	30000
Color Temperature	2580K
CRI	85
Operating Position	Horizontal
Fixture Requirement	Open Rated
ANSI Code	NA
Ballast Requirement	Electronic – operating frequency at or above 100 kHz Click here to see ballast compatibility list
Warm-Up Time	30 Minutes
Hot Re-Strike Time	15 Minutes
Suggested height above canopy (varies with room space, ventilation and reflector size, form and shape.)	4 ft

Directions

Do NOT handle lamp with bare hands. Use protective glove included in packaging.
Follow installation instructions located here.
Follow instructions provided by the ballast or system manufacturer to ensure safe operation of the lamp.
Do NOT power EYE HORTILUX DE Ceramic HPS with electronic ballasts operating below 100 kHz. Premature lamp failure can result.
For best performance, power the DE Ceramic HPS with EYE HORTILUX electronic ballasts.
Lamp operates in a horizontal burning position.
Must start 1000W DE lamp at 1000 watt setting.
Do NOT air cool the lamp. Reduced light output will occur.
Must operate 600W DE lamp at 600 watt setting only. Running the lamp at any other wattage will void warranty.
Must start 1000W DE Ceramic HPS lamp at 1000 watt setting and operate for at least 100 hours.
DE Ceramic HPS can take up to 20 minutes to get to full power during start-up and hot re-strike.
For an up-to-date list of compatible DE systems, visit www.eyehortilux.com/compatibility

WARNING
RISK OF ELECTRIC SHOCK:
• Turn power off before inspection, installation or removal.
• Protect lamp from direct contact with liquids to avoid breakage from thermal shock.
RISK OF FIRE:
• Keep combustible materials away from lamp during operation. UNEXPECTED LAMP RUPTURE MAY CAUSE INJURY, FIRE, OR PROPERTY DAMAGE
• Do not exceed rated ballast voltage.
• Do not use lamp if outer glass is scratched or broken.
• Do not turn on lamp until fully installed.
• Use only with fixture and ballast rated for this product.

CAUTION
RISK OF BURN:
• Allow lamp to cool before handling.
• Contains sodium – Avoid skin contact with broken pieces. LAMP MAY SHATTER AND CAUSE INJURY IF BROKEN
• Do not use excessive force when installing lamp.
• Dispose of lamp in an enclosed container.
• Wear safety glasses and gloves when installing lamp.